Skip to content
All Products
Wireless
Wired
In-ear
On-ear
Bluetooth Speakers
Multiroom Speakers
Accessories
Outlet/Archive
JAYS Journal
  • SWE | EN | DE
Cart

Your cart is empty

  • All ProductsAll Products
  • Headphones
    • Wireless
    • Wired
    • In-ear
    • On-ear
  • Speakers
    • Bluetooth Speakers
    • Multiroom Speakers
  • AccessoriesAccessories
  • Outlet/ArchiveOutlet/Archive
  • JAYS JournalJAYS Journal
Currency
Currency
JAYS Headphones
  • Currency
    Currency
SWE | EN | DE

a-JAYS Five for Android supports 4-pole CTIA / AHJ jack. The cell phone used needs to be released to the market 2012 or later and support 3-button remote headsets. On some products there might be some differences in functionality on up/down buttons. This is not a defect in the JAYS product, instead it is the manufacturer/model of the cell phone that has implemented limitations for 3rd part accessories and we recommend you to contact them too to highlight your problem. Below is a list with known products that work slightly different than normal.

Try removing the a-Six Wireless profile on your streaming device and redo the pairing process again.Force the a-Six Wireless into pairing mode by pressing and hold the ON button from OFF state for 5 seconds. Reset the earphones by connecting them to a charger. Clear the device list by pressing the ON button for 10s from OFF state. Press the ON button for 2s to start them again and go through the pairing process. Restart your streaming device (smartphone etc).

If you listen to loud music for a long time you ears will get tired, this is a sign that you are not treating them as should. Try to lower the volume or stop using your earphones completely for a couple of hours or even days.

With Bluetooth technology there is a small buffert of the audio before it starts playing. With most streaming apps and devices you will find that the audio is in sync, however there might be some apps, services and devices that can cause a slight delay. If so try another app, device or service.

No, lightning cables are not included in any orders.

They do support aptX but not AAC.

To reset the earphones, place both earpieces in the charging case. Place a finger on both left and right earpiece and keep them there until the LED on both earpieces flashes twice in purple as the earphones reset. Lift both earphones out of the box simultaneously. The earphones will now enter interconnection mode and try pairing to each other. When the left earphone indicator turns off and the right earphone indicator flashes in white and red light, switch off and on your Bluetooth on your device then connect it with your m-Sevens.

1 year or 2 years. You can read the full terms within the warranty section.

To reset the earphones, place both earpieces in the charging case and ensure them to fully touch with the pogopins. Place a finger on the center of top of both left and right earpiece and keep them there until the LED on both earpieces flashes twice in purple as the earphones reset. Please note there are about 2-3 seconds between the first and second  flash. Lift both earphones out of the box simultaneously. The earphones will now enter interconnection mode and try pairing to each other. When the left earphone indicator turns off and the right earphone indicator flashes in white and red light, switch off and on your Bluetooth on your device then connect it with your m-Sevens.

Contact the reseller of your purchase since they are responsible to handle the warranty claim with you. If any problems then contact JAYS Support.

The sound quality is very dependent on a correct fit inside your ear. Try all sizes with the included ear tips until you get a tight seal. Sound quality can also vary between audio streaming devices depending on hardware and streaming quality. 

The hours of battery you can get from a product varies a lot depending on factors like volume, range, radio signal environment, bluetooth chipset in the device and so on. Our test is made with iPhone 7 with medium volume. 

The hours of battery you can get from a product varies a lot depending on factors like volume, range, radio signal environment, bluetooth chipset in the device and so on. Our test is made with iPhone 7 with medium volume.

The hours of battery you can get from a product varies a lot depending on factors like volume, range, radio signal environment, bluetooth chipset in the device and so on. Our product is tested using 60% volume

Bluetooth use the 2.4GHz spectrum as do many other wireless products. If you experience problems with the signal try moving the audio streaming device to another location and try to shut off other wireless equipment to find out what is causing the problem. 

You can purchase them in pairs directly at jaysheadphones.com/accessories. If you have any problems or further questions then just contact our support for help.

Scratch noises are normally related to oxidation and dirt build up on the 3.5mm metal plug and can easily be removed by swiping around the metal jack with your fingers. Also make sure your listening device is not the issue meaning try the earphone/headphone on another device.

Change place of your audio streaming device and earphones if surrounding products disturb the audio signal.Turn of WIFI on your audio streaming device.Remove the earphones from the Bluetooth device list on your audio streaming device and redo the pairing procedure.Reset u-JAYS Wireless by tapping and hold the touch area for 6 seconds when in pairing mode.Restart your audio streaming device.Close apps on your audio streaming device that could use resources and cause audio streaming issues.A high audio level setting will always bring more background noise to the sound. Try adjusting the audio level on your audio streaming device and earphones to find the best setting.Smartphones and other audio streaming devices use different Bluetooth hardware that heavily can affect the sound quality on the paired earphones. Try a different source to see if audio is improved or not.

No, a-Six Wireless does not have active noise cancelling. However the passive noise cancellation is on par with normal hearing protection and will block most of the surrounding noise out.

No they are not waterproof or IP rated.

Yes, the m-Seven are IPX5 Rated

No, we have no app available for our bluetooth products.

No, u-JAYS Wireless does not have active noise cancelling.

Try to wiggle the earbuds to connect to the pogo pins or use a different charging cable and also a different charginng source. If the product still doesn`t charge then contact JAYS Support.

This is most often due to ear wax clogging the sound tube wax filter guard. Remove the silicon ear tips and use a tooth brush or similar and gently try to clean/remove the clogging from the metal grill and the sound should get back to normal. If not then contact your reseller of the product and make a warranty claim.

First, check your cell phone or media player you are using for your JAYS earphones and make sure this is not the source of the problem. Easiest way is to try your JAYS earphones in another cell phone/media player or another set of earphones in your cell phone/media player. If you by then are sure it’s the JAYS earphones that have a problem then contact your reseller and tell them about your problems with the product. We/they require a valid receipt to handle the warranty claim. This is for us/them to know the age of the product since we have a limited warranty period.

If you believe your product is defect we recommend that your first consult the User Manual, the solutions to many common problems can usually be found in the FAQ section in the last couple of pages for each language. If you have lost your manual you can find it at the download section for your product on our website.

If you fail to find a solution to your problem in the manual, then try to browse our FAQs. If you wish to return the unit for investigation we recommend that you first try to contact your reseller before forwarding your questions to us. For quick assistance, state your full name and address, and the name of the product you wish to return when contacting either us or your reseller.

Normally this is due to dirt/dust in the phone earphone jack or on the earphone metal plug causing bad/intermittent contact. Clean them both and try again. If the remote still have problems then if possible try them in another Apple device. If they still don’t work properly then contact your reseller for a warranty claim.

Speaker cables are around 2mm in diameter and inside of them there are 3 cords and Kevlar material as a strengthener. Soldering joint are 1-2mm big and everything houses inside a tiny 3.5mm plug. If you get problems with intermittent sound it might be the cable that have been exposed to too much pull or swing force. Our products are 100% tested before leaving our factory with highest quality standard but if you get problems with your cables, please contact the reseller of your product for further help and information.

Remove the silicone ear tip and check for dirt on the protection filter. All holes must be open otherwise it will affect the sound quality. Try cleaning the filter with a tooth brush.

Try removing the u-JAYS Wireless profile on your listening device and redo the pairing process again. Reset u-JAYS Wireless by tapping and hold the touch area for 6 seconds when in pairing mode.

Around 1h 45m depending on the source for charging. 

Around 1h to charge the earbuds and 2.5h to charge the box depending on the source for charging.

They use USB Micro. Charging cable is included.

All ears are unique meaning in-ear earphones sometimes can be a bit tricky in terms of finding a proper fit inside the ear canal for some users. We include a wide variety of sizes (XXS-L) on our silicon sleeves and in some models we also include foam sleeves. You can also have different size on your ears meaning one side can have Medium and the other Small so go ahead and try them all out. A bad fit will cause less bass response and they will also be more prone to fall out of your ear when you are on the go. It is also good to every now and then clean your ears since the ear wax can make it tougher for the silicone sleeves to stick onto the sides of the inner ear canal.

If the silicon sleeves doesn't make it for you we recommend trying out Comply Foam Sleeves that expand inside the ear canal. You can purchase these on our accessory page jaysheadphones.com/accessories. If you normally use XXS, XS or S on silicon sleeves we recommend foam sleeves with the size M. If you normally use M or L on silicon sleeves then go for L on the foam sleeves. We currently have no foam model available that fits a-Six Wireless. 

Remember most of our earphones can be used behind the ears meaning the ear absorb the microphonics (cable noise) and when you pull the cable they will still be stuck in your ears.

The hardware and software limitations in the Bluetooth chipset used in a-Six Wireless does not support previous track button press. 

Due to technical limitations with the compatibility in the latest operating systems from Android and Apple we have been forced to discontinue these apps.

Our Service

  • About Us
  • FAQ
  • Contact
  • Northbaze Group AB

Help

  • Customer Service
  • Shipping
  • Payment & price
  • Returns & Refunds
  • Warranty
  • Manuals

Legal

  • Terms of Use
  • Privacy Policy
  • Cookies

Newsletter

Subscribe to receive updates, access to exclusive deals, and more.

Follow JAYS

© JAYS HEADPHONES
  • American Express
  • Apple Pay
  • Google Pay
  • Klarna
  • Maestro
  • Mastercard
  • PayPal
  • Visa
Cookies
my logo title

Cookies

We use cookies. Many are necessary to operate the website and its functions, others are for statistical or marketing purposes. With the decision "Only accept essential cookies" we will respect your privacy and will not set cookies that aren't necessary for the operation of the site.

Essential

Statistics & Marketing

Accept all

Only accept essential cookies

Individual Data Privacy Settings

save & close

Essential

Essential cookies enable basic functions and are necessary for the proper functioning of the website.

display information

Statistics & Marketing

Marketing cookies are used by third parties or publishers to display personalized advertising. They do this by tracking visitors across websites.

display information
GDPR legal Cookie by beeclever
Privacy Policy Contact Legal Notice